Products
Blister
2016-07-26
Causes:
A. Moisture
(1). Condensation caused by substrate being brought into warm room after being stored in cool area.
(2). Condensation under print caused by screening on cold substrate.
(3). Moisture in the color itself caused either by leaving containers open for excessive periods of time or moisture in the powder prior to being mixed with oil.
Solutions:
(1). Bring substrate into printing and/or firing area 24 hours prior to processing.
(2). Same as A (1).
(3). Keep container tightly sealed when not in use. Consult supplier if problem persists.
